Supermicro 2U Server with 12 Drive Bays

ONLY 4 drive bays are connected to the motherboard.
If you want more drives connected you’ll need to add a PCI-e Raid Card.

Motherboard Model – X7DBE+

*Product Features*

• 2 x Intel Xeon X5450 3Ghz / 12M / 1333 FSB Quad-Core Processors
  
• 64GB DDR2 ECC FB-DIMM Memory – 16 x 4GB Sticks
• No Optical Drive
• 2 x 1000GB Sata Hard Drives (2000gb Total)
  
• 2 x 800 Watt Redundant Switching Power Supply Units
  
• Adaptec / Intel Onboard Raid
• Supports Raid Levels 0 / 1 / 5 / 10
  
• SISMO+ Remote Access Card
• Supports ESXI  4.1 & 5.0 Software
  

Front I/O Ports: 2 x USB  / 1 x VGA

Back I/O Ports: 2 x PS2 / 2 x USB / 1 x VGA / 1 x Serial / 2 x Network Ports

*Recently Off Lease And In Excellent Condition*

30 Day Warranty From Garland Computers
Product SKUs
MBD-X7DBE+-O

X7DBE+ (Standard Retail Pack)

MBD-X7DBE+-B

X7DBE+ (Bulk Pack)
Physical Stats
Form Factor

Enhanced Extended ATX

Dimensions

13.68″ x 13″ (34.7cm x 33cm)
Processor/Cache
CPU

Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below:
Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz
Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz
NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors

System Bus

1333 / 1066 / 667 MHz system bus

Operating System Software

Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
System Memory
Memory Capacity

Sixteen 240-pin DIMM sockets
Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Mirroring supported

Memory Type

667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

512 MB, 1GB, 2GB, 4GB

Memory Voltage

1.8V only
1.5V(AMB)

Error Detection

Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset

Intel® 5000P (Blackford) chipset
MCH + PXH + ESB2

SATA

Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)

IPMI

Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMLP)
(Optional: AOC-SIMLP-B(+))
(Optional: AOC-SIMLP-3(+)) with 3rd LAN support

Network Controllers

Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking

Graphics

ATI ES1000 controller with 16 MB of video memory

Super I/O

Winbond 83627HG chip
Input / Output
Serial ATA

Six Serial ATA ports
Six SATA hard drives supported

IDE

Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Compact Flash (40-pin connector, IDE 1, single channel) slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100

Floppy

1 Floppy controller; 1.44 MB, 2.88 MB

LAN

2x RJ45 LAN ports

USB

2x USB rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant

VGA

1x VGA Port

Keyboard / Mouse

PS/2 keyboard and mouse ports

Serial Port / Header

1 Fast UART 16550 serial port
1 Fast UART 16550 serial header

Parallel Port

1 ECP / EEP parallel port
Chassis ( Optimized for X7DBE+ )
2U Chassis

CSE-825TQ-R700LPV
CSE-825TQ-560RCV
CSE-825TQ-R700RCV

Tower / 4U Rackmount

CSE-745TQ-R800
CSE-745TQ-800

Important Chassis Notes

To ensure system stability, a 700W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Expansion Slots
PCI-Express

2 (x8) PCI-e slots
1 (x4) PCI-e (using x8) slot
1 SEPC (Supermicro PCI-e Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)

PCI-X

2x 64-bit 133MHz PCI-X (3.3V) slots
1x 64-bit 100MHz PCI-X (3.3V) slot
System BIOS
BIOS Type

8Mb Flash EEPROM with Phoenix® BIOS

BIOS Features

Plug and Play (PnP)
SMBIOS 2.3
DMI 2.1
PCI 2.2
ACPI 1.0
USB Keyboard support
Hardware BIOS Virus protection
Management
Software

Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
NMI

Power Configurations

ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
PC Health Monitoring
Voltage

Monitors for CPU Cores, +3.3V, +5V, +5V Standby, & ±12V
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN

Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors

Temperature

Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support

LED

CPU / System Overheat LED

Other Features

Chassis intrusion detection
Chassis intrusion header
SDDC Support
Operating Environment / Compliance
RoHS

RoHS 6/6

RoHS Compliant 5/6, Server Exemption

Environmental Spec.

Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
OS Compatibility

• Please see our OS Compatibility Chart