Supermicro X9DR3-LN4F Dual Socket 2011 DDR3 Motherboard with I/O Shield

Processor/Cache

• Dual Socket R (LGA 2011)
• Intel® Xeon® processor E5-2600 (up to 135W TDP **)
• Up to 30MB

Note* BIOS version 3.0 or above is required

Note** Motherboard supports this maximum TDP. Please verify your system can thermally support.Cache

System Bus

• QPI up to 8 GT/s

System Memory

Memory Capacity

• 24x 240-pin DDR3 DIMM slots
• Up to 1.5TB DDR3 ECC LRDIMM
• Up to 768GB DDR3 ECC RDIMM
• Up to 128GB DDR3 ECC/non-ECC UDIMM

Memory Type

• 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
• Support ECC and non-ECC UDIMMs* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.

DIMM Sizes

• 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
  64GB LRDIMM

Memory Voltage

• 1.5 V, 1.35 V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset

• Intel® C606 chipset

SATA

• SATA3 (6Gb/s) and SATA2 (3Gb/s)
• RAID 0, 1, 5, 10 support

SAS

• SAS from C606
• RAID 0, 1, 10 support

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Nuvoton WPCM450 BMC

Network Controllers

• Intel® i350 Quad Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Video

• • Matrox G200eW

• •  Input / Output

SATA

• • • • 2 SATA 3.0 ports (6Gb/s)
      • 4 SATA 2.0 ports (3Gb/s)

SAS

• • • • 8 SAS ports from C606

LAN

• • • • 4 RJ45 Gigabit Ethernet LAN ports
      • 1 RJ45 Dedicated IPMI LAN port

USB

• • • • 9 USB 2.0 ports total
        (4 rear + 4 via header + 1 Type A)

Video

• • • • 1 VGA port

Serial Port / Header

• • • • 2 Fast UART 16550 ports: 1 rear and 1 header

DOM

• • • • 1 DOM (Disk on Module) power connector

TPM

• • • 1 TPM Header

I/O Shield is included